Identifying Wire Color Functions on Trailer with 4-Way Wiring
Question:
I have a trailer that im trying to get my lights to work. The trailer wires are green white yellow and brown the new wire has green green with brown white yellow and brown what gos where
asked by: Nick
0
Expert Reply:
The trailer wiring you have represents two very common color standards.
green will be right turn/stop
white is ground
yellow is left turn stop
brown is running light
The new wires that have brown and yellow or green are the running light circuit but designated to either side of the trailer. The green and brown is for the right side and yellow and brown is for the left side.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Caliper Bolts for AL-KO/Hayes Disc Brake Caliper BP18-050
- Q&A: Replacement Oil Seal for AL-KO 568303
- Q&A: Does The Progressive Dynamics PD4655V Have A Lithium Jumper
- Q&A: Which Instructions Are Used Installing a Roadmaster Brake-Lite Relay in a Ford F-150 w/ Neutral Tow
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Trailer Tire Sizing
- Article: Flat Towing Package for 2014-2015 Chevrolet Equinox