Thickness of Steel on Curt Adjustable Channel Bracket # C48650

Question

Question:

How thick is the steel?

asked by: Sam

0

Expert Reply:

I went out to our warehouse with a digital caliper and measured the thickness of the steel on the Curt 5-Position Adjustable Channel Bracket # C48650 to be right at 0.322".

The bracket features an overall height of 10 inches and an overall width of 3-1/2 inches.

expert reply by: Chris R

0

click to enlarge

Answer 1

The MORryde Shock Absorbing Suspension Equalizers #MR27ZR are going to be compatible with the 6-Leaf Double-Eye Spring #e94SR. They will connect with the MORryde Suspension Upgrade Kit #MR46ZR and a Hanger Kit #H248. With the springs being…

view full answer...

Answer 2

The MORryde cushioned suspension equalizers like the CRE3000 part #MR27ZR that you referenced do not affect the height of the trailer at all. If you wanted to lift the trailer you could use the Correct Track lift kit part #RR23QX as well.

view full answer...

Answer 3

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but…

view full answer...

Answer 4

I reached out to MORryde and the MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at is designed for 35" axle spacing and would not work with your trailer with 36" axle…

view full answer...

Answer 5

The hanger spacing is going to depend on a few things including the spring measurements and the equalizers being used. But if you were using spring #e67SR the distance between the hangers would be around 29-3/4 inches. However this is using hanger…

view full answer...

Answer 6

The correct hanger spacing for your trailer will depend on several factors; I cannot generalize and give you a specific figure. Hanger spacing depends on spring length, the size of the equalizers used and the length of the shackle straps. The linked…

view full answer...

Answer 7

Trailer leaf springs first need to be rated for the weight load on them and be of the appropriate length to fit the hanger spacing, equalizers and shackle straps. If you are putting much larger tires on the trailer you may have to reposition one axle…

view full answer...

Answer 8

We do have trailer tires that are slightly shorter than your current LT (or light truck) tire which is size 235/85R16. Those tires, such as the Westlake ST235/85R16 Radial Trailer Tire #LHWL410 measure 31.7 inches in diameter when inflated. They have…

view full answer...

Answer 9

For the yoke style couplers my favorite coupler lock is the Fastway part #FA86-0015-312. We have found that this is the most universal of the locks we carry and also works the best. It will work great on your yoke coupler part #AT80072. I attached a…

view full answer...

Answer 10

We confirmed with Bulldog that the Bulldog 5-Position Adjustable Channel Bracket #BDAC5000300 has a 24,000 lb capacity. While the thickness of the metal is important for the overall capacity the design of the bracket also plays a big factor as well.

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Thickness of Steel on Curt Adjustable Channel Bracket # C48650

Product Page this Question was Asked From

Continue Researching