How Heavy Can the Spare Tire be with the Lippert Underchassis Double Bin Storage Unit

Question

Question:

will that spare tire carrier support the weight of 245/70r 19.5 tire and rim . the winch ?????????

asked by: John

0

Expert Reply:

The spare tire winch included with the Lippert Underchassis Double Bin Storage Unit part # LC125460 has a 150 lb weight capacity. There is not a standard weight for all 245/70-19.5 wheel and tire assemblies therefore you would need to weigh one of yours in order to determine if it can be used with the Lippert Underchassis Double Bin Storage Unit.

expert reply by: Conner L

0

Answer 1

The hook items you are referencing with the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier #LC125460 are a reach rod and a crank for the spare tire carrier. If you take a look at the accompanying photo you can see the crank handle…

view full answer...

Answer 2

On the Lippert underchassis storage pin and spare tire mount #LC125460 the center to center distance between the mounting brackets is approximately 70-1/2 inches. I have included some links that show some additional measurements. The overall…

view full answer...

Answer 3

The Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier for RVs - 99-1/2" Long #LC125460 you were looking at does not include a latch or hole allowing it to be locked, so you will need to get a bit creative to come up with a way…

view full answer...

Answer 4

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 5

The main reasons why trailer tires blow out is heat generated from under inflated tires and overloading the tires. Trailer tires should be inflated to the maximum psi indicated on the tire. A tire in the same size but with a higher ply rating would…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

How Heavy Can the Spare Tire be with the Lippert Underchassis Double Bin Storage Unit

Product Page this Question was Asked From

Continue Researching