Solution for Installing A-Frame Trailer Jack on Frame with Lower Jack Hole that Doesn't Line Up
Question:
We have a 2014 livin lite 16DBS aluminum framed trailer. We have ordered a new coupler as well as a few other items from etrailer. I have received the coupler and it looks impressive. However when I position the coupler on to the aluminum frame the hole for the Jack on the trailer and hole on the coupler do not line up. If I line up the holes the coupler has roughly a 1/4 gap along the either side. So what can I do? Sense there are 3 holes on the side of the coupler, can I bolt on a piece of steel or aluminium to fill the gap? Or can I have a welder weld on a piece of steel to fill the gap? Or is there another option that I am not aware of?
asked by: Roger J
Expert Reply:
You could use a spacer on your trailer frame to allow the Demco Coupler part # DM14793-95 to fit and have the jack hole on the top and bottom match up. Or you might relocate the lower hole or remove it all together. Most A-frame trailers don't use a lower jack hole like what you have so getting rid of it all together would make the install a bit easier.
Product Page this Question was Asked From
Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K
- A-Frame Trailer Coupler
- Standard Coupler
- Bolt-On
- 10000 lbs GTW
- 2 Inch Ball Coupler
- Auto Latch
- Demco
more information >
Continue Researching
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Lift - 2,000 lbs
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Travel - 2,000 lbs
- Shop: Bottom Support Plate for A-Frame Trailer Jacks by Dutton-Lainson
- Shop: Optronics ThinLine LED Trailer Tail LIght - Stop, Turn, Tail - Submersible - 11 Diodes - Clear Lens
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K
- Shop: A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson
- Shop: Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel - Sidewind - 15" Travel - 1,000 lbs
- Search Results: trailer jack base plate
- Search Results: mounting kits
- Search Results: inner jack tube
- Q&A: Availability Of A-Frame Trailer Jack With 2" Outside Diameter
- Q&A: Comparing Demco A-Frame Coupler DM37ZR and DM14793-81
- Q&A: Dimensions for the 10K Demco eZ-Latch A-Frame Trailer Coupler
- Q&A: Replacement A-Frame Jack With 2 Inch Outer Tube
- Q&A: Trailer Jack with Outer Tube Diameter Closest to 1.9 inch.
- Q&A: 2 inch Outer Diameter A-Frame Trailer Jack Recommendation
- Q&A: Recommended Trailer Jack For Jet Ski Trailer
- Shop: Trailer Hitch
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation