Trailer Wiring Harness Recommendation for 2018 Toyota Highlander

Question

Question:

What trailer wiring setup should I get for my 2018 Toyota Highlander?

asked by: Derek

0

Expert Reply:

The trailer wiring harness I recommend for your 2018 Toyota Highlander is the Tekonsha kit part # 118449. This brand of wiring kit has the most reliable converter box we offer so we recommend it the highest. I attached an install video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

There are a number of trailer hitch receivers that fit your 2018 Toyota Highlander and it can be confusing because they have a lot in common; however, there are differences as well. I recommend the Curt #C13200 or the etrailer.com #E98844, they are…

view full answer...

Answer 2

The recommended trailer wiring harness for your 2017 Toyota Highlander is the Tekonsha part #118449 which I attached an install video for. We like Tekonsha harnesses the best as they tend to be the most reliable. If you can find a grommeted hole in…

view full answer...

Answer 3

Looking up the information for your 2021 KZ Sportsman 301BHKSE I see that they use axles rated for 4,000lbs. For this we have either the 26" #e48SR or 25-1/4" #e93SR leaf springs. You will need to measure the springs on your KZ to…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Trailer Wiring Harness Recommendation for 2018 Toyota Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching