Recommended SumoSprings for Front and Rear of 2019 Fleetwood RV on Ford F-53 Chassis

Question

Question:

What's up? I have a 2019 Fleetwood LXE on the Ford F-53 chassis and wanting to add sumosprings to the front AND rear. Can you tell me which ones fit?

asked by: Greg

0

Expert Reply:

For your 2019 Fleetwood LXE RV built on the Ford F-53 chassis I recommend the SumoSprings Maxim Custom Helper Springs # SSR-187-40-1 for the rear and the Rebel Helper Springs # SSF-170-40-2 for the front.

These springs are specifically designed for RVs like your Fleetwood LXE that have a GVWR between 16,000 and 22,000 pounds and they will work great to upgrade the suspension and help smooth out your ride. Both sets have a 2,600 pound load-leveling capacity and their maintenance-free microcellular urethane springs allow for progressive load control to for a comfortable ride regardless of how much weight you're carrying.

I have attached a couple installation videos that you can also use for reference.

expert reply by: Chris R

0

Answer 1

You have two options for your 2020 Entegra Coach Vision 29F with a GVWR of 16,000-lbs. You could use the SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-184-40-1 you were looking at, which have a 3000-lbs capacity or you could use the…

view full answer...

Answer 2

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 8

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 9

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 10

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 11

No, the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs #LC26VR includes the slide racks and the following pieces of hardware: 2 Rack-end pugs 2 Rivets 2 Rollers 2 Snap rings 6 Wear plugs I've attahced a photo of the…

view full answer...

Answer 12

The bolt that is attached to the top of the SumoSprings Rebel Custom Helper Springs - 2 Piece #SSF-173-40-2 is a 3/8" x 3/4" flange bolt. This bolt is not offered as a separate part but you could easily go down to your local hardware store…

view full answer...

Recommended SumoSprings for Front and Rear of 2019 Fleetwood RV on Ford F-53 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching