Can Curt True Course Electronic Sway Control be Used with Tekonsha RF Brake Controller

Question

Question:

Hello I want to buy sway control from your website, just a small question I have Tekonsha Prodigy RF Wireless Trailer Brake Controller installed, will this work with this brake system, and can we have the complete installation instructions. Regards

asked by: Surinder J

0

Expert Reply:

From your vehicle's trailer wiring connector you'd want to plug in the Prodigy RF part # TK94FR and then you'd plug the Curt True Course # C94VV into that and from there your trailer's wiring.

I attached a link to the RF brake controller instructions as well as a picture that covers how the Curt installs.

expert reply by: Jameson C

0

click to enlarge

Answer 1

If it is necessary to cut the rails, I suggest you place the top piece into the side rails and measure from the top to the point that matches your desired length. Please look at image number 2 and compare to your particular camper. Can you place the…

view full answer...

Answer 2

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 3

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…

view full answer...

Answer 4

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV works better with a weight distribution system. The True Course is more for emergency maneuvers, high winds, semi trucks passing and so on. It is not necessarily designed for minor…

view full answer...

Answer 5

Those are some good questions, and we'll start with if the brake lights will flash during activation using the Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV. The answer to that is no, they will not flash when the True Course is…

view full answer...

Answer 6

The Jayco Jayflight 2005 28FKS has a dry tongue weight of 1135 lbs. That is a lot for a 3/4 ton truck and will have you close to the payload. With the air bags you will be able to get rid of the sag in the suspension but I would certainly want sway…

view full answer...

Answer 7

I just checked with my contact at Curt. The Curt True Course #C94VV does not have a provision for the user to adjust its sensitivity. The True Course is more for emergency maneuvers, high winds, semi trucks passing and so on. It is not necessarily…

view full answer...

Answer 8

I have heard of similar issues and the culprit is often that the Trailer Sway Control System on your 2015 Toyota Tundra is fighting the Tuson Asymmetric Sway Control #335TSC-1000 that you have on your Safari Condo Alto 2114. This is not normal and…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...