Towing Capacity and Recommended Trailer Hitch for 2018 Chevy Equinox
Question:
can you give me the hitch and towing capacity for a 2018 equinox?
asked by: Jillian
Expert Reply:
If your 2018 Chevy Equinox is not a diesel, then I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76419 because it is the least visible, able to work well with accessories like a bike rack and is easy to install.
If you have the diesel model, then I instead recommend the Draw-Tite # 76217.
The towing capacity is dependent on your engine. If you have the 1.5L turbo or the 1.6L turbo diesel, then you will have a towing capacity of 1,500 lbs. If you have the 2.0L turbo then you will have a towing capacity of 3,500 lbs.
For your trailer wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118750 which will connect to your factory harness behind each tail light.
Finally, I recommend the etrailer.com ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. It is a great option for most trailer applications. I've attached an article to help you determine best fit with your trailer, and have also attached videos of these products to assist.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How To Tell If a 2020 GMC Terrain Has the Factory Tow Package for Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Tell if you Have the Factory Towing Package 2018 Chevrolet Equinox
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose a Battery Charger
- Q&A: Does Replacement Brass Connector # T4750300 Fit Dexter DX6.6 Actuator
- Q&A: Availability of Trailer Hitch for 2023 Mercedes-Benz GLE 350
- Q&A: Flat Towing Components And Requirements For A 2024 Chevy Equinox
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Article: Trailer Tire Sizing
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Measure for Trailer Hitch Drop
- Article: Flat Towing Package for 2016-2017 Chevrolet Equinox and GMC Terrain