Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Snapper Pin
Snapper Pins have many uses on equipment, trailers, couplers, pintles, etc. The quick connect and disconnect feature makes them easy to use. The double wire mechanism keeps it securely "locked" during use.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Randy: Hey, Guys. It's Randy here at etrailer.com. Today we're taking a look at the Redline coupler pins. These pins are gonna be a really good solution. They come in several sizes for all different sizes of couplers, so we can keep that latch down and engaged, but also the 3/8-inch variety and the 2-1/2 inch length makes a great replacement for drop leg or caster wheel pins that we might've lost.This is our 1-3/4 usable portion pin. It's gonna be available in the 1/4-inch or the 5/16-inch pin diameter.
For the larger one, like what we have here, with the 2-1/2 inches of usable space, it's available in the 1/4, 5/16, and the 3/8.I really like this design. I think the longer end here helps us get a little bit more purchase on it when we wanna pull it off. And I also like the tension that's on the spring. It's got a good amount to it. It's not so tough that you can't get it off, but it's also not so flimsy that you think it'll just fall off as we head down the road.It comes through, very positive click there.
It's gonna be nice and secure. I also think this is gonna be one that's gonna last for a very long time, just like most of the coupler pins out there. These don't get a whole lot of wear to them, but we do have that white zinc finish, so as moisture and stuff, the road grime, gets on it, corrosion's not gonna be an issue for us.I think this pin's gonna work out, as you can see, several different applications. The 2-1/2-inch and the 1-3/4 length are gonna be pretty common. When we compare these to other pin and clips out there, I like the way these work.
I like the way they feel. That spring mechanism to release it is nice and strong.As far as other options that you might have, some of these are equipped with chains already connected to them. That chain, you could bring down and connect to your coupler, using maybe a self-tapper screw or a little nut and bolt. Now, that type of pin and clip I think will come in handy if you have a habit of losing them often. People misplace them, leave them up here, they fall off.
If you do that often, grab one with a chain. It's probably a better option.Additionally, if you want more security, if you'd like to have a lock also, we have several available on our website in all the different popular sizes. Basically, you'll just slide your pin through so it keeps your coupler locked, but then you'll have a lock that'll slide on the end, ensuring nobody can separate the trailer from the truck.And of course, regardless of the size that you choose, installation's gonna be really straight forward. We just need to pull out on the keeper. It's got a little bit of a spring effect to it that'll allow us to open it up. We can slide it through our coupler. Once we get that through, we're gonna keep her down on the other side. You can see that holds it in place there really nicely. This is a perfect fit for this style coupler. If you want a little bit more slack, I'd go up to the 2-1/2 at that point.And that'll complete our look at the Redline coupler pins.
Average Customer Rating: 4.8 out of 5 stars (48 Customer Reviews)
This is a great small size safety snapper pin. I have it attached via chain to your Husky 2" hitch coupler (HT 87074). It is the perfect answer for a safety pin that insures your coupler stays locked. I am highly satisfied with both products and would recommend either to anyone. (See Picture)
Poor quality, inferior metal, not safe in my opinion.
As described
Have received snapper pins and have installed them. They'll see salt water followed weekly, but will be followed by a freshwater rinse. Wish I could have found SS versions of these, but I could not. Product arrived in a few business days and in fine condition as have all of my other Etrailer purchases.
Easy to apply and remove.
This is actually the second one of these I've installed. I helped a friend put one on his 06 Outback and it was really easy. So when I needed one for my 05 Outback I knew where to buy one.
Super-simple installation and looks good too.
Tim F.
4/24/2018
They are all working just fine still.
These are ok, but the bail on both of them was twisted slightly and didn't line up with the pin. They're functional, but I own better.
I ordered a Class V ball and ball mount with pins. This is for the 2.5 inch heavy duty receiver. I needed a set-up for pulling an emergency services boat that weighs over 18,000 lbs.
I was able to get a set-up rated at 20,000 lbs, in stock. Shipping was fast and quality looks good.
Rehabbing an old 16' flatbed equipment trailer with slide in ramps. The ramps were always held in stored position by a rod that went all the way through all the holes and was held in place with a hairpin. Getting that rod lined up with all the holes was always the most difficult and unnecessarily annoying part of dealing with the ramps. Got rid of the rod and replaced with one of these pins for each hole. Much easier, and the price was better than I could get locally.
Makes it very convenient to be safe by locking out the latch on a trailer coupler. My two experiences with etrailer.com have been very good. Would recommend them as a reliable source so far.
I've had limited luck finding non-locking hitch pins but eTrailer has them. Price was great and delivery was quick. Couldn't ask for a better experience.
Wow! Fast turnaround. I had lost a pin for my Blue Ox towbar while on a short trip and consequently my wife had to drive the tow car home. I decided I needed spares on all the pins and removable components before the next trip. Everything came quickly and fits perfectly. Thanks!
I had to restock my Snapper Pins for the fleet I coordinate. I was able to buy all the sizes I needed. Great communication on the shipment and arrived in a reasonable amount of time.
The entire order process was smooth and easy to navigate. I appreciate the update email that i received from etrailer, and the status of my order was never a mystery.
The shipment was easy to track, and was received in good condition. I highly recommend etrailer for all of you RV needs. I also appreciate and love the video reviews. They are the best!
Easiest company around with which to work. Great selection, great service, and when you call with a question, you get to speak to an actual human..., not a never ending phone-tree. Great, and thank you!
I was missing a part for my bike trailer. Found the perfect part here! Snapper pin does just what I need it to. And i don't have to worry about it coming out!
Exact match for the existing snapper pin on my trailer. Will serve as a spare. Photo should be updates to reflect actual product . . . . . tail end of snapper is angled.
Great! I used on a pull behind bike trailer I built.
Perfect fit for securing tow bars to trailer. Well contructed and great price. FAST shipping. Very satisfied.
nice pin to keep the coupler locked on the ball
Perfect fit on my pop up trailer's coup ler.
Exact size pin that latches securely
Delivered ahead of time. Thank you
Good pricing
Fast delivery
Attention to the details
Special size box that fit into the mailbox!
Best in the business
I got just what I was looking for at a reasonable price and on time.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe C.
6/3/2015
As I thought, the pins did rust out. they still work, but as I said originally, i couldnt find them in St. Stl.