Trailer Wiring Recommendation for 2018 Dodge Journey with LED Taillights

Question

Question:

I have a 2018 Dodge Journey with LED taillights, which trailer wiring kit do I need?

asked by: mike h

0

Expert Reply:

For your 2018 Dodge Journey with LED taillights the best trailer wiring option we have is the Tekonsha kit part # 118536. This is our most reliable option that we have for your vehicle so I recommend it for you.

expert reply by: Jameson C

0

Answer 1

Odd is a very good word to describe a company telling you that a trailer hitch would not fit your 2016 Dodge Journey Crossroad because it has LED lights. False is another word that I would use, as you can see by the accompanying photos and linked…

view full answer...

Answer 2

The easiest way to determine if you have LED or incandescent lights on your Dodge Journey is to simply watch them illuminate and turn off. If they come on immediately and turn off immediately then they are most likely LEDs. LEDs will also be quite a…

view full answer...

Answer 3

For your 2018 Dodge Journey the Tekonsha trailer wiring harness part #118567 is the best option as it protects your vehicle wiring the best and has the most reliable converter box.

view full answer...

Answer 4

Although I don't know if your 2018 Dodge Journey already have wiring for the light functions on a trailer, I can let you know how to find that out and offer some solutions for if you don't. To figure out if your Journey has wiring you simply…

view full answer...

Answer 5

I can help you identify your tail lights as the images you sent are of a connector that is not part of the taillight wiring on your 2013 Dodge Journey. I have attached images of the LED and incandescent taillights that your Journey could have. The…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Trailer Wiring Recommendation for 2018 Dodge Journey with LED Taillights

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching