How Does the Pollak 7-Way to 12 Volt Power Outlet Adapter, # PK11896, Work

Question

Question:

I understand that the concept of the cigarette lighter plug, but what are the two flat blade input sockets for?

asked by: Me

0

Expert Reply:

If you are looking at the face of the Pollak 7-Way to 12 Volt Power Outlet Adapter, # PK11896, the top blade contacts the 12 volt power pin on a 7-Way. The bottom pin contacts the ground circuit. This completes the circuit and allows the 12 volt outlet side to work.

expert reply by: Michael H

0

Answer 1

If your transfer pump has a positive and ground wire then you'd just need to make sure that you run the wires to the correct pins on the 7-Way Round RV Style Trailer Connector #A7WCB. The positive wire would from the pump will need to run to…

view full answer...

Answer 2

Here is what you could do, you could install a Tow Ready Battery Isolation Solenoid #PK5231201 on the 12 volt power circuit of your 7-way so that it would only have power when the reverse light circuit is activated. You would connect the solenoid…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 10

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 11

For your Dometic DuoTherm the Advent Air Unit part #ACDOM150 would be your best option that will give you the higher BTU rating 15k and easily connects to the current wiring you have now.

view full answer...

How Does the Pollak 7-Way to 12 Volt Power Outlet Adapter, # PK11896, Work

Product Page this Question was Asked From

Continue Researching