Steering Stabilizer Fit on 2018 Fleetwood Bounder 36D on Ford F-53 Chassis

Question

Question:

Which Roadmaster SS would you recommend for a 2018 Bounder 36D?

asked by: Jerry W

0

Expert Reply:

For a steering stabilizer that fits your 2018 Fleetwood Bounder 36D on a Ford F-53 chassis, I verified with the manufacturer the correct fit, which is the following part number:

- Roadmaster Reflex Steering Stabilizer # RM42RR

You made a really nice choice going with a stabilizer because it will make steering your Fleetwood motorhome significantly easier. The reason for that is the stabilizer is constantly going to be working for you, helping you stay centered at all times, so driving your rig seems less like a job and more like the leisure it is supposed to be.

expert reply by: Kyle S

0

Answer 1

I would be happy to make those recommendations for you. To add a front sway bar to your 22,000 lbs 2019 Fleetwood Bounder you will want the Roadmaster Front Anti-Sway Bar item #RM-1139-148. This anti sway bar comes with all parts necessary to…

view full answer...

Answer 2

I strongly recommend both front and rear anti-sway bars, and for your 2018 Fleetwood Bounder 36D on a Ford F-53 chassis with a GVWR of 22,000 lbs and a V10 engine the correct rear anti-sway bar is the Roadmaster Rear Anti-Sway Bar #RM-1139-149 while…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 11

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 is listed to fit and install above the leaf springs on your 2019 Coachmen Leprechaun 319MB. I tried looking up a photo of the suspension on your motorhome but I could find…

view full answer...

Answer 12

Hey Robert, thanks for reaching out! You are correct that you'll want to install the rear Hellwig Anti-Sway Bar #HE78RR first on your '22 Entegra Odyssey 26D, and then if you still need more help you can install the front Hellwig Anti-Sway…

view full answer...

Steering Stabilizer Fit on 2018 Fleetwood Bounder 36D on Ford F-53 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching