Does TracRac SR Ladder Rack Come with Mounting Hardware

Question

Question:

Do the base rails include all the hardware?

asked by: Bob

0

Expert Reply:

Yes, the base rails for TracRac SR ladder racks like the part # TH21000 that you referenced does come with install hardware. I attached a picture that has all of the hardware that comes with it.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The base rails you need to install your Thule TracRac uprights in the bed of your 2012 Ram 3500 long bed is the part #TH21000.

view full answer...

Answer 2

If your 2009 Chevy Silverado 1500 was the 6-1/2 foot long bed length you'd want the part #TH43002XT-501 or if you had the 5-1/2 foot bed length you'd want the part #TH43002XT-608.

view full answer...

Answer 3

For a 2009 Dodge Ram with an 8 foot bed you would actually need Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43003XT-000. This comes with the 21000 series base rails which are designed for 8 foot beds. Ladder rack #TH43002XT-606 is designed…

view full answer...

Answer 4

To install the Thule TracRac Sliding Ladder Rack Uprights you have part #TH43002XT in the bed of your 2013 GMC Sierra 2500 will require you go with new base rails that fit the dimensions of your new truck as the Dodge rails won't work. So if you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 12

You can transfer the Thule TracRac SR #TH43003XT-010 from your 2003 to your new 2024 F-250. The base rails you need to move the rack to your 2024 are the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21000. These come with all of…

view full answer...