Replacement Master Cylinder, Bearings, and Tires for Tandem Axle Trailer for 23 Cuddy Cabin Boat
Question:
I recently purchased a used 23foot cuddy cabin boat with trailor..now Im told that before pickup the master cylinder and brakes may have to be replaced along with 4 tires and wheel bearings replaced..is master cylinder a d brakes a necessity and about how much extra would this cost me?
asked by: Mark A
Expert Reply:
It sounds like your new boat trailer hasn't been taken care of and you want an estimate on cost to get up and running. Unfortunately, it isn't easy to give you anything tangible without more information. The cost of your tires, bearings, and master cylinder will depend on what is actually on your trailer. The brand of coupler and model will determine the master cylinder needed. The size of the tires will be a big determining factor, and the bearing sizing is very important as the wrong size will simply not work.
The best thing you can do is look at the wheel and give me the tire information printed on the side. Then you will need to look at the coupler and give me all the information printed on it so I can see if we have a replacement master cylinder option or if the entire coupler needs replaced. Finally, you will need to pull one of your hubs and give me the number printed on the face of the inner bearing outer bearing and the seal on the back of the hub. Those numbers will help get the proper replacement bearings and seal for your trailer.
If you can't get the bearing numbers and seal numbers then you can use a digital caliper like # PTW80157. Then you can use the attached diagram to assist with measuring locations.
I've attached the link to master cylinders, bearings, and tires to give you an idea on cost, but I can really help once you provide the information requested.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Disc
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Master Cylinder
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Car Camping Checklist
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement Titan Master Cylinder that is Stamped 23744
- Q&A: Replacement Surge Brake Coupler For Aluminum Boat Trailer With 10,000LB Coupler
- Q&A: Dimensions of Replacement Damper for Model 20 Actuator
- Q&A: Replacement for Gabriel Shock Model 610712
- Q&A: Replacement Master Cylinder For a Demco DA16 Surge Brake Actuator
- Q&A: How to Replace the Shock on a Titan Model 10 Surge Brake Actuator
- Q&A: Will The Kodiak Disc Brakes Kit # KOD49FR Fit In EZ Loader Trailer With 3,700LB Axle?
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Trailer Couplers
- Article: How Much Does a Boat and Trailer Weigh?