Recommended Transmission Cooler for a 2015 Dodge Durango

Question

Question:

Im looking to install an Durale Transmission cooler on my vehicle and as wondering if there was an adapter needed to attach the transmission lines.

asked by: Dan

0

Expert Reply:

There is not an adapter that will be needed to install a transmission cooler on your 2015 Dodge Durango. For a transmission cooler, I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13504 because it has a large surface area which equates to better cooling performance and it comes with everything needed for installation except common hand tools.

I have attached a sample install video for you as well.

expert reply by: Conner L

0

Answer 1

The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally cooled…

view full answer...

Answer 2

I checked the owners manual of your 2015 Dodge Durango V6 and the towing capacities depend on the transmission style. For light duty RWD models and AWD light duty models the capacity is 3,500 lbs trailer 350 lbs tongue weight. For standard RWD and…

view full answer...

Answer 3

I took a look at the owner's manual for your 2015 Dodge Durango AWD and did see that for the Light Duty model, the maximum trailer weight is 3,500 lbs and the maximum tongue weight is 350 lbs. Unfortunately, the overall rating of a towing setup…

view full answer...

Answer 4

To install a p3 brake controller part #90195 in a 2015 Dodge Durango you'd need to use the part #TK93VR which plugs into the port under the dash of your vehicle without requiring additional wiring. If you check out the install video I attached at…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

We have a very easy to install 7-way wiring kit that fits your 2020 Dodge Durango with the Tekonsha part #TK22113. This comes with everything needed for a plug and play install of a 7-way on your Durango!

view full answer...

Answer 8

The blue wire of the 7-way kit part #TK22113 goes to the reverse light circuit of your 2015 Dodge Durango. The good news is that if you trailer does not need a reverse light circuit you don't have to connect this circuit but it's there in…

view full answer...

Answer 9

I'm happy to assist. Attached you will find photos of the Tekonsha OEM Replacement Vehicle Wiring Harness #TK22113. These will correspond with the installation details I've also attached for your 2016 Dodge Durango.

view full answer...

Answer 10

Hi Andrei; yep, you're 100 percent right, you should use the 30 amp breaker. That's why for the installation kit I recommend using the Universal Installation Kit for Trailer Brake Controller #ETBC7. The #ETBC7 comes with multiple breakers,…

view full answer...

Answer 11

You have a couple of options to add a trailer connector to your 2016 Dodge Durango Limited that did not come with the factory tow package. For a 4-Way flat connector you can use #118617. Or, if you need a 7-Way trailer connector, use #TK22113. I have…

view full answer...

Answer 12

The application "Excluding Limited" is something that is in our fit guide so people can separate their models, because some wiring harnesses do not fit a 2014 Dodge Durango Limited. However, your 2014 Durango Limited without the factory tow…

view full answer...