Will Fulton Winch Cable # FWC3250100 Fit a 2,800 lb Shelby Jack 5470A

Question

Question:

Is this cable strong enough for a Shelby 2800# winch model 5470A?

asked by: Franklin

0

Expert Reply:

The Fulton Galvanized Winch Cable with Hook # FWC3250100 can work with your Shelby winch rated for 2,800 lbs but you will be limited by the 1,400 lbs safe working load limit.

We do have wire rope that is rated for higher safe working load capacities but they have diameters that are larger than 3/16". If you let me know what wire rope diameters your Shelby jack is compatible with I can make some other recommendations if necessary.

expert reply by: Jon G

0

Answer 1

The winch cable I recommend for a Shelby 5480A Boat Trailer Winch is the Fulton Galvanized Winch Cable with Hook part #FWC3250100 which measures 25' long and has the needed weight capacity. In regards to weight ratings, there are many factors…

view full answer...

Answer 2

For your Rhino-Rack RTC-Style Roof Rack Tracks #RTC16, you will want to use the supplied 4 M10 channel nuts: -Replacement M10 Channel Nut for Rhino-Rack Accessories #RR89TB.

view full answer...

Answer 3

For a rock guard compatible with the Curt Rambler Steel Tow Bar for Curt and Blue Ox Base Plates #C26FR, I recommend the Blue Ox KarGard Towed Vehicle Protector #BX8870 which attaches to the tow bar by installing the included bracket between the tow…

view full answer...

Answer 4

The only difference between the base plates for your 2021 Jeep Wrangler Unlimited is that one, the Blue Ox, has mounting tabs for a connector plug, while the Curt does not: - Connector Plug Mounting Tabs: Blue Ox Base Plate Kit - Removable Arms…

view full answer...

Answer 5

For your 2016 GMC Sierra 3500 we have the Curt front hitch part #C31071 that fits the Denali models as we've had customers come back and tell us how well it fit their Denali and how trimming of the front fascia was not required.

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Will Fulton Winch Cable # FWC3250100 Fit a 2,800 lb Shelby Jack 5470A

Product Page this Question was Asked From

Continue Researching