Replacement 2872 Key for Karrite Cargo Box

Question

Question:

Do you have 2872 key replacement for karrite Car top carrier

asked by: Scott

0

Expert Reply:

Yes, for the replacement key that will work perfectly with the 2872 lock core on your Karrite Cargo Box you just need the part # THKEYN2872. This includes 1 key so you may want to order a couple so you can have a spare on hand.

expert reply by: Chris R

0

Answer 1

To replace the lost key to a Karrite Voyager cargo box you can use the Replacement Key for Thule Racks and Carriers - 2872 #THKEYN2872, which has the same 2872 key code as the one you're seeking.

view full answer...

Answer 2

To find out which replacement key to use with your Thule and SportRack bike rack, you will need to look at the core of the lock. On the outside, it will have a four-digit number. That will be the number for the THKEYN---- for your replacement. For…

view full answer...

Answer 3

Yes the key part #THKEYN2872 is correct for your Pepboys Voyager XL with the key number 2872.

view full answer...

Answer 4

Since your lock core is engraved with 2856 the correct key you would need for your cargo box would be the #THKEYN2856.

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Replacement 2872 Key for Karrite Cargo Box

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching