Torque Rating for Hitch Balls in etrailer.com Ball Mount Kit # 989900

Question

Question:

When I purchased this item I removed and misplaced the tags which list the torque requirements for each ball. Please list the torques for the 2inch and 1 7/8inch ball nuts. Thank you

asked by: Jimmie D

0

Expert Reply:

The torque rating for both hitch balls in # 989900 is 250 foot pounds.

expert reply by: Jameson C

0

Answer 1

The Tow Ready 2 Inch Hitch Ball, part #63845, you have referenced needs to be torqued to 250 foot pounds. It is recommended to frequently check that the ball is tightened to these specifications. If you are meaning the mounting bolts that are used…

view full answer...

Answer 2

Saris offers the Hitch Tite Threaded Anti-Rattle Lock, #SA3022, for use with the Saris Freedom 4 Bike Platform Rack, #SA4414B, that you mentioned. In addition, they offer the 8 Foot Long Cable Lock, #SA981, to secure your bikes and help prevent…

view full answer...

Answer 3

You'll have to know the distance from the top of your hitch opening to the ground and then from the bottom of your trailer coupler down to the ground when sitting level to determine which ball mount you'd need. There's a link…

view full answer...

Answer 4

You will need to use a cheater bar on the end of the wrench to get enough leverage to loosen the nut on the ball on ball mount #C45036. Chances are the crescent wrench has a wide and flat handle so you will likely need to go to a hardware store to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The 2022 Subaru Outback and Outback Wilderness share the same hitch fits. Although the #DT73RR Draw-Tite Class III hitch is a fit for your vehicle, once installed the entire hitch would be visible from the rear. If that doesn't bother you,…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Torque Rating for Hitch Balls in etrailer.com Ball Mount Kit # 989900

Product Page this Question was Asked From

Continue Researching