SuperSprings Jounce Spring Kits for Front and Rear Axles of 2016 RF-53 Winnebago Motorhome

Question

Question:

2016 winnebago vista lx 24000 gvwr trying to figure out correct part to order you are giving me part #170-40-2 for front which shows 16k-22k direct web site gives me 173-40-2 same for back 20k-22k you give part# 180-54-1 20k-22k sumo 183-54-1 need to know correct parts to install on my rv

asked by: DANNY M

0

Expert Reply:

Your 2016 Winnebago Vista LX is indeed built on the Ford F-53 V-10 chassis. The four versions of this Class A motorhome have two different GVWRs, either 18K for the 27N and 30T, or 22K for the 35B and 35F. I could not find a variation with a GVWR of 24,000-lbs. I linked the part of the online document with this information that I found on their website.

The SuperSprings front-axle jounce spring kit for the 2WD model is # SSF-170-40-2 which works for GVWRs from 16K to 22K. This is the one you want to use. The other kit # SSF-173-40-2 is for heavier vehicles.

For a rear axle kit you can use SuperSprings kit # SSR-184-40-1 if your Vista is one of the 18K GVWR models (the 27N or 30T) or kit # SSR-180-54-1 if you have either of the heavier versions (the 35B or the 35F).

expert reply by: Adam R

0

click to enlarge

Answer 1

For your 2022 Fleetwood Bounder 35K on a Ford F-53 chassis I recommend the Roadmaster Rear Anti-Sway Bar for Motor Homes #RM-1139-145. This will minimize side to side movement and improve overall stability and diminish the effects of crosswinds,…

view full answer...

Answer 2

We have what you need, but if your 2018 Coachmen Mirada Motorhome is built on the Ford 20,500 GVWR chassis, the Roadmaster Rear Anti-Sway Bar, #RM-1139-149 is not the correct component. That item is for the 22K chassis. You need the Roadmaster Rear…

view full answer...

Answer 3

I'd recommend the SumoSpring product over the Timbren, because of the ride quality. The rubber used in the Timbren springs is pretty stiff. The product works very well in that it offers plenty of support but you will experience a fairly harsh…

view full answer...

Answer 4

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 5

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 6

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 7

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 11

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 12

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...