Does the 2K Dexter Axle 5 on 4-1/2 Complete Hub-and-Drum Assembly Come Fully Assembled
Question:
Are the bearings already packed and pressed into the drums or does everything need assembled when I receive it?
asked by: Rob
Expert Reply:
Everything comes with the Dexter Axle 5 on 4-1/2 Complete Hub-and-Drum Assembly # 8-257-5UC3-EZ
but you will need to pack the bearings and then install them and the grease seal inside the hub and drum assembly.
You can use a bearing packer like part # PTW1218 to make packing the grease into the bearings much easier. This tool requires the use of a grease gun like part # L30200 and a cartridge like part # L11465 if you don't already have these handy.
If you'd rather avoid having to pack everything then we actually have our Hub and Drum Kit # AKHD-545-2-EZ-2K which is the exact same thing, just with all of the bearings pre-packed with grease inside the hub.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
LubriMatic Standard-Duty, Lever Action Grease Gun
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 6000 psi
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Search Results: ez loader trailer parts
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Drum - Zinc - 2" Ball - 8,000 lbs
- Search Results: e z loader oil bath hubs
- Video: Dexter Axle Trailer Bearings Races Seals Caps - Seals - 10-63 Review
- Shop: Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3.5K
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35 Review
- Video: Dexter Axle Trailer Brakes - Hydraulic Drum Brakes - 23-312-313 Review
- Q&A: What Free-Backing Hydraulic Brake Assemblies do You Recommend for My 3,500 Pound Axle?
- Q&A: Surge Brake Actuator Replacement Recommendation for Atwood Model 84132
- Video: Titan Brake Actuator - Surge Brake Actuator - T4747220 Review
- Shop: Unitized Oil Seal for Trailer Hubs
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Video: etrailer Hub And Drum Assembly Installation
- Q&A: Replacement for UFP A60 Actuator on EZ Loader Boat Trailer
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM8759122-30
- Search Results: atwood actuator
- Search Results: brake backing plate
- Search Results: surge brake actuator
- Search Results: 8000 lb surge brake actuator
- Q&A: Locating Correct Replacement Bearings for 1996 EZ Loader Boat Trailer
- Search Results: hubs
- Q&A: How Tight Should Spindle Nut On Dexter 7000lb Axle Be?
- Q&A: Adding Trailer Brakes to a Little Guy Meerkat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement for A-Frame Coupler With Yoke Latch
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams