Dimensions of Mounting Holes on Buyers Products Combination Pintle and Hitch Ball

Question

Question:

Can you give me the hole size and the dimensions of how far apart are the bolt holes from each other

asked by: Dawayne B

0

Expert Reply:

The Buyers Products 10 Ton Combination Hitch with Mounting Kit # 33710057 has hole diameters of 5/8 inches. They are spaced 3-3/8 inches and 1-3/4 inches on center. I've attached a photo to assist as well as a video.

expert reply by: Jason S

0

click to enlarge

Answer 1

The correct hardware to use with the Buyers Products 3 Position Pintle Hook Mount part #337PM25812 will largely depend on what accessory will be attached to it. For example, the Buyers Products 10 Ton Combination Hitch with Mounting Kit part…

view full answer...

Answer 2

If you have the mounting area on the back of your semi, my recommendation is the Buyers Products Air Chamber And Plunger Kit For PH50/PH55 Series, part #337PH50ACMK. This plunger will use your trucks air brake system. I have included a product…

view full answer...

Answer 3

I went out to our warehouse and measured the Buyers Products Air Chamber and Plunger Kit #337PH50ACMK you were looking at. The bolt hole spacing on the mounting bracket measures 5-3/4" center to center, and the ovals measure 1-1/2" long.…

view full answer...

Answer 4

I have attached a photo of the Tow Ready Pintle Hook Mount, part #63059 with several measurements noted. As the photo shows, the length of the shank from the end to the front face of the plate is 14-5/8 inches. The plate is 5/8 inches thick so the…

view full answer...

Answer 5

The correct replacement slide out motor for your Power Gear Slide-Out is the: -Replacement Gear Motor Assembly for Lippert Power Gear Slide Outs #LC386480.

view full answer...

Answer 6

I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item #3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want the Buyers Products Flatbed/Flatbed Dump Hitch Plate…

view full answer...

Answer 7

I was able to get the dimensions you were looking for of the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with Pintle Mount #3371809050. Overall it measures 62 inches wide x 13 inches tall x 22 inches deep; also from the top of the…

view full answer...

Answer 8

The BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch #58388 that you are interested has a 5/8 inch diameter hitch pin hole which is the standard size for 3 inch hitches. Most likely this is what you have as a 3/4 inch diameter hitch pin…

view full answer...

Answer 9

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

view full answer...

Answer 10

Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit and work well for you. It also…

view full answer...

Answer 11

Usually they put utility bodies like the one on your 2002 Ford F-350 on the cab and chassis versions of the truck (rather than the standard models that would come with a regular bed). You would need to look at the hitches for the cab and chassis…

view full answer...

Dimensions of Mounting Holes on Buyers Products Combination Pintle and Hitch Ball

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching