What Camera to Use with Pre-Wired 2019 Grand Design Solitude

Question

Question:

2019 Grand Design Solitude, prewired for back up camera. Same Furrion camera as 2018?

asked by: Lawrence

0

Expert Reply:

Yes, your 2019 Grand Design Solitude is prewired for a Furrion observation system which means the correct kit for you is the Furrion Digital Wireless Observation System part # FOS43TASF. Please keep in mind that your Solitude is prewired for an observation system, not a backup camera. This means that the camera will power on with the running lights. If you only wanted the camera to power on when reversing then you would need to hardwire it to the reverse light circuit using the included harness.

expert reply by: Conner L

0

Harold

3/14/2020

1 Will the FOS43TASF work for my 2018 Grand Design Solitude?2 Do you know if my Solitude is pre-wired and if so compatible with the FOS43TASF?

Reply

Chris R.

3/16/2020

Based on my research your 2018 Grand Design Solitude should indeed be pre-wired for a Furrion camera system, for which the Vision S System # FOS43TASF mentioned above would be perfect. You can verify this by taking a look at the rear of the trailer. There should be a bracket already mounted towards the top that looks like the shark fin style mount included with this kit. You can also contact Grand Design directly with your VIN and they would be able to tell you for sure.

Reply

Jim B.

8/2/2020

Will it also work on my 2021 Reflection? Can I get it without screen and use my iphone?

Reply

Chris R.

8/11/2020

The Furrion Vision S # FOS43TASF will work great on your 2021 Reflection, however there's not a way to sync it up to your iPhone.

Reply

Answer 1

The new Rhino Box from Lippert currently has no replacements so you won't be able to swap out this pin box with a Sidewinder to add more turning clearance. Because of this you'll have to use a sliding 5th wheel hitch in your 6.5' bed to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 4

Hello Chris, thanks for reaching out. The Air Lift SlamAir Air Helper Springs #AL59210 are designed to fit a lowered 2012 F-150. As long as the drop is between 2" and 6" they will fit great. With your drop being an axle flip I imagine it…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Hey Robert, thanks for reaching out! You are correct that you'll want to install the rear Hellwig Anti-Sway Bar #HE78RR first on your '22 Entegra Odyssey 26D, and then if you still need more help you can install the front Hellwig Anti-Sway…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 9

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The Progressive Dynamics Converter #PD4655V is specifically designed to replace the WFCO 8955 you have on your 2014 Thor Hurricane 27K motorhome. This is compatible with your two 6volt batteries as they are going to be wired in series to create 12V…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

What Camera to Use with Pre-Wired 2019 Grand Design Solitude

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching