How to Find the Axle Capacity on a Jayco 5th Wheel Trailer
Question:
How can I determine the weight rating for the axle on a Jayco 5th wheel trailer?
asked by: Brandon
Helpful Expert Reply:
There are a few ways to determine the axle capacity on your Jayco 5th wheel trailer.
The trailer's main identification plate will often indicate axle ratings along with gross vehicle weight (GVWR) and the unit's VIN. This plate will typically be located near the front of the trailer. Also the trailer's owner documentation may include this information.
Axles themselves will often have a sticker or plate applied by the axle manufacturer that indicates the weight rating. This sticker/plate will generally be located near the center of the axle.
If neither of these options is available an axle's diameter can give you a general idea of its weight capacity.
Typical Trailer Axle Diameters Based on Axle Capacity are as follows:
1,000-lb - 2,000-lb Axles: 1-1/2" - 1-3/4" diameter
3,500-lb Axles: 2-3/8" diameter (can have a 3-1/2" diameter, but rarely)
6,000-lb - 7,200-lb Axles: 3" diameter
8,000-lb Axles: 3-1/2" diameter
9,000-lb Axles: 4" diameter
10,000-lb Or more axles: 5" diameter
If you can tell me the specific year, model/number, and VIN I would be happy to look up the specs for you.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: 5th-Wheel-to-Gooseneck Coupler Adapter Mounting Plate for MORryde Pin Boxes
- Q&A: MORryde Adapter Plate For MORryde 5th Wheel Hitch And Andersen Ultimate 5th Wheel Connetion
- Search Results: bearing seals
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Identifying the Bearings and Seals on a Lippert Trailer Axle
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
- Shop: Fifth Wheel Hitch
- Shop: Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Q&A: Can Andersen Ultimate Fifth Wheel Adapter be Used on a Reese 5th Airborne Cushioned Pin Box
- Q&A: Generator Set Up To Run 2022 Jayco Eagle Fifth Wheel.
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84557UC3-EZ Review
- Shop: RV Power Cord
- Shop: RV Jack Pads
- Shop: RV Antenna and Radio
- Shop: Blind Spot Detection
- Shop: RV Interior Lighting
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer jack
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Search Results: bearing buddy
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Article: Trailer Tire Sizing
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: 10~36
on Trailer Leaf Spring Suspension
