Replacement Truxedo Tonneau Cover Tart Recommendation for 2012 Ram 1500

Question

Question:

hope these help

asked by: Jack G

0

Expert Reply:

First we have to figure out what tonneau you have. Can you send me a picture of the truxedo? With that I can most likely figure it out. Here's link to all of the ones we have for your truck for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Jack G.

8/23/2018

hope these help

Reply

Jameson C.

8/23/2018

They do! From looking at them I was able to determine that yo uhave a Truxedo Lo Pro part # TX546901 which means the cover you need is the part # TX546901-CVR.

Reply

Answer 1

Replacement Cover #TX546901-CVR is a direct replacement for Lo Pro QT Tonneau cover #TX546901 which does fit the 2011 Ram 2500 short bed. So as long as the cover on your truck is a TruXedo Lo Pro QT cover then this replacement will fit.

view full answer...

Answer 2

The Replacement Cover for TruXedo Lo Pro Soft Roll-Up #TX546901-CVR you mention is not the correct replacement tarp for your Truxedo Lo Pro Soft Roll-Up Tonneau Cover #TX546601. Instead, the Replacement Cover for TruXedo Lo Pro Soft Roll-up Tonneau…

view full answer...

Answer 3

Replacement cover #TX5456-CVR is for Lo Pro QT cover #TX545601 which is for a 2001 to 2004 Toyota Tacoma with 5 foot bed and there is no way it will fit your 2011 Dodge Ram with cover #TX546901. The replacement for that cover is #TX546901-CVR.

view full answer...

Answer 4

You're welcome! It looks like there is a Tri-Fold option, a Hard Fold option, and a Lo-Roll option when it comes to Tonno Pro tonneau covers for your 2022 GMC Canyon with the 5' bed. If you have the Lo-Roll you can use the TruXedo Elevate…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 9

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Replacement Truxedo Tonneau Cover Tart Recommendation for 2012 Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching