Gooseneck Hitch Fabrication Parts for 2018 Ford F-450 Cab and Chassis

Question

Question:

I have a 2018 F450 cab and chassis I m looking for a gooseneck that will fit.

asked by: CRAIG T

1

Helpful Expert Reply:

We do not at this time have a custom-fit gooseneck hitch for your 2018 Ford F-450 cab and chassis but we do have hitch fabrication parts like Curt # C65500 which has a rating up to 30K depending on the installation. This hitch does require under-bed reinforcement to reach its maximum capacity.

expert reply by: Adam R

1

Answer 1

I do have a solution for you as the Buyers Products Pintle Hitch Plate w/ ICC Bumper #3371809038A is only confirmed to fit the 2003-2010 Chevy/GM 4500 and 5500 cab and chassis trucks. Instead you can use the Fabrication Kit #3371809042 along with the…

view full answer...

Answer 2

Yes, the Buyers Products 42" x 13-1/2" Gooseneck Hitch Plate #3373014981 can be bolted directly to the top of your frame rails on your 2017 Freightliner Cascadia. The overall height is 5" tall. The main difference between the Buyers…

view full answer...

Answer 3

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 9

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 10

Reese has a gooseneck ball that fits the OEM pucks of your 2020 GMC Sierra 3500 with the part #RP23FR but this doesn't have any rise built into it. The ball you mentioned does not fit your truck.

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Gooseneck Hitch Fabrication Parts for 2018 Ford F-450 Cab and Chassis

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching