How to Find Replacement Hubs With 4 on 4 Bolt Pattern
Question:
I need 4 on 4 hubs for a 3/4inch axle that is 5 1/2inch long
asked by: Mike
Expert Reply:
There are hubs available with a 4 on 4" bolt pattern but the measurements you gave are not what is needed to find them. Instead, you need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper to measure your spindle to the thousandths of an inch where the bearings and grease seal ride.
You can use the photo I've attached to see exactly where you need to measure. If you get back to me with this information I'd be happy to try and help you find the correct hub.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: CE Smith Replacement U-Bolt w/ Nuts for 1-3/4" Round Axles - 3/8" Diameter - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: Shackle Bolt with Locknut For Double-Eye Springs - 1/2" Diameter - 3" Long
- Search Results: calkins boat trailer
- Q&A: Replacement Idler Hub that Takes L44649 Inner and Outer Bearings and Has a 4 on 4 Bolt Pattern
- Q&A: Hub with 4 Lug Bolt Pattern that Uses Bearing Numbers L44649
- Q&A: Replacement Hubs with 4 on 4 Bolt Pattern for 1" Non-Tapered Spindle on Boat Trailer with 12" Wheels
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Brake Controller
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Search Results: dust caps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
on Trailer Hubs and Drums
