Parts Needed to Flat Tow 2011 Chevy HHR

Question

Question:

I need to flat tow my 2011 Chevy HHR. What parts will this require?

asked by: Murphy

0

Expert Reply:

In order to flat tow your 2011 Chevy HHR there are a number of parts you need, starting with compatible base plates. I recommend the Roadmaster XL Base Plate Kit # 3141-1, though please keep in mind there are no base plates compatible with the SS model of your vehicle. For a tow bar I recommend going with the Roadmaster Sterling # RM-576 because of how easy the tow bar is to connect to the base plates due to its long telescoping arms as well as its included EZ Hook safety cables. To keep your Sterling tow bar clean and allow it to always function as needed it is a very good idea to use the Roadmaster Tow Bar Cover # RM-055-3.

For a wiring kit that will allow your Chevy's lights to function while being towed I recommend the Roadmaster Diode Kit, # RM-152. Since fuses are going to need to be pulled for you to flat tow your HHR I strongly recommend using the FuseMaster Fuse Bypass # RM76511 so you do not have to continually remove the fuse each time you want to tow your Chevy; with the bypass installed you will only have to flip a switch so the fuse will be inactive.

A supplemental braking system is a requirement in most states and I highly recommend the SMI Stay-IN-Play # SM99251 for this. This is a proportional braking system which is a one-time install which you can leave in so you'll never have to deactivate or reactivate it. You will need to use Charge Line Kit # RM-156-25 as well as Roadmaster Stop Light Switch Kit # RM-751428 along with your supplemental braking system; this kit activates your RV's monitoring system to alert you when your HHR's brakes are being applied.

Finally, it is likely you will need a high-low adapter such as # RM-076 to keep your tow bar level with your tow vehicle. The adapter you need is going to depend on some measurements you'll need to take. I have added a link to a help article on high-low adapters which explains the measurements you'll need, as well as a link to our page with our selection of adapters.

expert reply by: Kyle S

0

Answer 1

The Roadmaster 5000 Stowmaster tow bar will work with XL base plate kits from Roadmaster like the part #3141-1 that you referenced.

view full answer...

Answer 2

To get around this, you're going to need to the: -Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles #RM-152-98146-7. This kit is going to include everything you need to turn your 4-pole to a 6-way trailer connector so you can complete…

view full answer...

Answer 3

To flat tow your 2011 Chevy HHR you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you: Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar #RM-522. This tow…

view full answer...

Answer 4

While it is possible to cut the 4-pole connector off of the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56302 and wire it into a 6-pole socket, you would be doing yourself an IMMENSE disservice using any kind of plug-in tow bar wiring…

view full answer...

Answer 5

Yes, pretty much all states (with the exception of Missouri for some reason) and Canadian provinces require that a towed vehicle have a supplemental braking system and most all supplemental braking systems come with a breakaway unit. The most…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a permanent…

view full answer...

Answer 10

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 11

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 12

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Parts Needed to Flat Tow 2011 Chevy HHR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching