Will Malone MegaWing Kayak Carrier # MPG207 Fit Honda Ridgeline Factory Roof Rack

Question

Question:

Will the Malone mega wing mount to the factory cross bars of a 2010 honda Ridgeline? I had bought a sea wing from Cabelas and tried it but it didnt seem to want to mount solidly so I returned it. My wife and I each have a pescador pro 100 and we currently use jhooks but Id like to use the mega wings to get a lower profile when transportating.

asked by: Mike K

0

Expert Reply:

The Malone MegaWing Kayak Carrier # MPG207 referenced in your question will fit the factory crossbars on your 2010 Honda Ridgeline. This system includes universal hardware that is designed to fit any style crossbar (factory or aftermarket) that is up to 4-1/4 inches wide. I confirmed this with my contact at Malone.

This V-style carrier is great for loading larger kayaks like what you have. It does have a weight capacity of 150 pounds but you still need to make sure you are staying under the weight capacity for your Ridgeline's roof. This information should be listed in your owner's manual.

expert reply by: Chris R

0

Answer 1

If your vehicle's owners manual states your roof has a capacity of 165lbs or more you need the etrailer J-Style Kayak Carrier - Folding - Universal Mount Item #e98878. This light carrier has a capacity of 150lbs and will work great for your…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Don't worry Dave, we have everything you need. The Malone LowBed MicroSport Trailer #MPG464-LB will allow you to carry boats up to 20' long and can support up to 500lbs on the crossbars. So with the Bunk Kit #MPG561 and 2 Bike Racks…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350…

view full answer...

Answer 6

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Answer 7

We do have everything you need to install a 7-Way on your 2020 Subaru Outback Wagon so you can utilize a brake controller but we need to start off by making sure you have a 4-Way for the basic trailer lighting functions. If you don't already have…

view full answer...

Answer 8

The pewag Servo RS Tire Chains #PWRSV79 have a thicker chain link of 3.5mm where the Chains #PWRS79 are 3.2mm thick. Both sets are going to be S-class rated which according to the owners manual for your 2023 Subaru Outback Wilderness will allow them…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

I can certainly help you out with using your 2022 Subaru Outback Wilderness to tow a trailer. You will want to use a trailer hitch receiver like Curt Trailer Hitch Receiver 2" #C67JR which offers a simple no-drill installation. A ball-mount will…

view full answer...