Recommended Bearing Buddy For 3,500 lbs Hub Drum Assemblies # AKHD-545-35-K

Question

Question:

What size bearing buddy will work with these?AKHD-545-35-K

asked by: Chris

0

Expert Reply:

For the Trailer Hub and Drum Assembly - 3,500-lb Axle # AKHD-545-35-K you will want to use the Bearing Buddy # BB1980A for chrome or # BB1980A-SS for stainless steel. These protectors are 1.980 inch hub bore.

expert reply by: Jason S

0

Answer 1

There really isn't a solution we can provide aside from replacing the spindle since yours is damaged beyond repair. Since you have a 3,500 lb EZ lube axle the correct replacement spindle would be the part #TRU74FR. I recommend taking it to a shop…

view full answer...

Answer 2

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

view full answer...

Answer 3

The part number 8-245 is an obsolete part number but I was able to find some info on it. It was basically a 3,500 lb hub and drum that fit a 84 spindle. Because of that we have a solution that will fit. The part #AKHD-545-35-K is a 3,500 lb hub/drum…

view full answer...

Answer 4

I can tell you how to figure out the exact hub you need for your 1989 Ranger Trailer (maybe even without measuring!) although there is no database that specifies each part for a trailer like your 1989 Ranger Trail. Even though it is likely to have a…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Recommended Bearing Buddy For 3,500 lbs Hub Drum Assemblies # AKHD-545-35-K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching