Recommended Tow Bar Lighting with 6-Way Connector for 2018 Jeep Sahara Unlimited

Question:

I need the wiring to connect from the 6 plug under the baseplate in front of Jeep to the tail lights, brake lights, and turn signals. I need it to work with the LED lights on the Jeep from the 7 pin connector from my RV. What is the best way that will insure the safest and reliable way to install a wire harness? Recap RV 7 pin connector to 6 pin connector under front of Jeep to be installed by dealer. Brake Buddy system to be installed by dealer. What is needed is harness to work with 2018 Jeep Sahara Unlimited with LED lighting. Need a part number for above description. Thank you.

asked by: Rusty M

Expert Reply:

To wire your 2018 Jeep Sahara Unlimited like you described in your question so that it accepts the RVs tail, brake, and turn signal lights, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit includes everything needed to wire the Jeep and also connect it to the 7-Way on the RV.

It includes the 4-wire harness for connecting to the Jeep's tail light circuits, 4 Hy-Power diodes to prevent feedback from the RV, a 6-Way connector that will mount to the front of the vehicle, and enough coiled wiring to go from there to the RV's 7-Way. This is also compatible with the LED lights on your Jeep.

If you already have the vehicle side 6-Way and the means to connect it to your RV's 7-Way, then you can use the Roadmaster Kit # RM-152. This includes just the 4-Way wiring, diodes, and wire loom.

I have attached an installation video on the 2017 Jeep Wrangler Unlimited that you can use for reference.

expert reply by: Chris R