Cushioned Pin Box Recommendation for 2017 Forest River Silverback 33ik

Question

Question:

I have a 2017 forest river silverback 33ik with 1621 pin box.I tow with 2008 chevy silverado with 8 foot bed. which pin box do I choose in 18000 or 21000 flex air?

asked by: Bill M

0

Expert Reply:

I looked up the weight of your 2017 Forest River Silverback 33ik and it looks to be right at 14k so the 18k Flex Air part # LC369535 that you referenced would work well. I appreciate you listing that you have a 1621 pin box too as that makes picking out the correct replacement much easier.

expert reply by: Jameson C

0

Answer 1

When it comes to proper tire pressure for the Westlake 215/75R17.5 Radial Tire w/ 17-1/2" Wheel #LHAS701, you're going to want to always follow what's on the sidewall of the trailer for the maximum tire pressure when…

view full answer...

Answer 2

The Trailair Flex Air 5th Wheel Pin Box #LC369535 you mention will replace Lippert 1621 pin boxes, so if you have a 1621 pin box this will work for you. If you are unsure which pin box you currently have, you should be able to locate the…

view full answer...

Answer 3

The Westlake 215/75R17.5 Radial Tire w/ 17-1/2" Wheel #LHAS701 does not include the balance beads, or any balancing done when the manufacturer mounts the tire and wheel combination. We do offer the balance beads if you would like to have…

view full answer...

Answer 4

I do have an option for you but the Ford TPMS for Trailers only works with 15" and smaller trailer wheels due to the valve stem hole size of .452" they use. The valve stem hole size on a 16" and larger trailer wheel like…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Cushioned Pin Box Recommendation for 2017 Forest River Silverback 33ik

Product Page this Question was Asked From

Continue Researching