BakBox Compatibility with OEM REV Tonneau on 2018 Ford F-150

Question

Question:

the cover on my truck is hard folding by Rev is Bakbox installable with this product ?

asked by: Raymond B

0

Expert Reply:

The BAKBox 2 Collapsible Truck Bed Toolbox for BAK Roll-X and BAKFlip Tonneau Covers # BAK92321 has not been tested for compatibility with the REV brand tonneau. The BAK rails have a specific channel for that box to fit which you can see in the attached photos. If your rails have a similar rail it may fit or you may be able to make a customized mounting to work.

The BakBox is approximately 60" long x 10" wide x 10" deep and has a weight capacity of 400 lbs.

The # BAK92120 you asked from is the Chevy GMC equivalent with the same dimensions.

expert reply by: Jason S

0

click to enlarge

Answer 1

I attached a picture that has all of the available positions you can use for varying heights with the B and W Companion hitch part #BWRVK3305. It's best to measure first to determine which height you'd need, but if not then I'd go with…

view full answer...

Answer 2

Hello, I have attached a help article and an installation video that will hopefully assist in needed measurements to make the installation a smooth process. Happy Camping.

view full answer...

Answer 3

I have a possible solution for you. Unfortunately, I confirmed with my contact at Curt (the maker of UWS boxes) that the UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box #UWS01048 is not available in a gauge higher than 0.63. This…

view full answer...

Answer 4

BAKFlip tonneau covers are going to interfere with opening the lid of the UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box #UWS01048. Instead you can use a toolbox like the UWS Truck Bed Chest #UWS08297 or the #UWS08298 for black.

view full answer...

Answer 5

For your 2022 Ford F-250 we have the UWS tool box part #UWS01048 for a black box or the part #UWS01040 for bright aluminum that are a confirmed fit and are shorter than the bed rail height of your truck so your tonneau would be able to close over…

view full answer...

Answer 6

BakFlip makes the REV tonneau covers and they are identical aside from the name, as far as I know from the information I was able to gather. The rails should be interchangeable, assuming you use rails from the identical versions of each brand. It…

view full answer...

Answer 7

Extang EnCore Hard Tonneau Cover EX62450 will use different rail styles than the TruXedo TonneauMate Truck Bed Toolbox #TX1117416 so they are not directly compatible. You could customize mounts, let the toolbox rest on the bed, or use the TruXedo…

view full answer...

Answer 8

If you have the TracRac SR #TH43002XT-508 installed on your 2022 Ford F-150 (with a 5-1/2 foot bed), I recommend the BAKFlip MX4 Hard Tonneau Cover - Folding #BAK76FR. The MX4 is made of 1/2 inch thick rustproof aluminum panels and involve an easy…

view full answer...

Answer 9

We do carry the UWS Truck Bed Toolbox - 5th Wheel Series Chests in Black #UWS01066 and Polished Aluminum #UWS01042 which are specifically designed to work with 5th wheel hitches. Both are confirmed to fit your 2021 Ford F-350 Super Cab 4x4 dually…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...