Does etrailer Sticker Come on Camco RV Cutlery Tray CAM43508

Question

Question:

Is it easy to peel off the sticker such as a pressure sensitive adhesive maybe like rubbermaid. I would not want to spend time preparing for use.

asked by: JAMES K

0

Expert Reply:

The photo of the Camco RV Cutlery Tray # CAM43508 does show two stickers, the small etrailer logo sticker that we apply only to the photography sample (to prevent theft of our photography) and the Camco sticker with product barcode information. When you order yours it will not have the etrailer sticker on it and the Camco sticker will peel off easily.

expert reply by: Adam R

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

The Rhino-Rack's Locking Fishing Rod Carrier #RR574F is great product that will work wonderfully for your application, you can't go wrong purchasing this product. This has universal mounting hardware that fits all popular roof rack bar…

view full answer...

Answer 3

Hey Dave, the Yakima Rod Carrier part #Y04089 does require that rods longer than 7 feet need to get broken down. This is a cautionary statement due to the flex of rods on that forward clamp. Some rods may have too much flex from the headwinds and…

view full answer...

Answer 4

I spoke a representative from Yakima about the Lift Brackets for Yakima ReelDeal or Big PowderHound and PowderHound Carriers - Qty 2, part #Y8860037. They said these brackets will give you almost 4" of additional clearance. The lift brackets do…

view full answer...

Answer 5

I've included a wiring diagram for you, this should help install the iRV RV Stereo #IRV64FR. This radio gives you the option for either RCA or HDMI, you can use whichever works best for your rig. Most of these radio's are wired similarly, so…

view full answer...

Answer 6

For your 2016 Jayco RV built on the Ford F-53 chassis, I recommend going with the SumoSprings Custom Helper Springs over an air bag kit. These springs will provide you with excellent support to level your ride and minimize any sway that you are…

view full answer...

Answer 7

I recommend using the Equal-i-zer Weight Dist Shank #EQ90-02-4500 to replace the shank on your E2 hitch. With this shank you will have 14" from the center of the hitch pin hole to the center of the vertical holes for the hitch head. This will…

view full answer...

Answer 8

The Camco #CAM43503 adjusts from 9 to 13 inches wide, and is 11 inches long, so it should just fit in your kitchen cabinet drawers.

view full answer...

Answer 9

With trailer tires like your ST235/85R16 in a Load Range G like the #TTWPRG235R16 you have to inflate them to 110 psi when the tires are cold and you'll be set. With trailer tires you need to run the max pressure rating at all times so that you…

view full answer...

Answer 10

The correct SumoSprings Maxim Custom Helper Springs for a 2015 Jayco Alante 31L are part #SSR-184-40-1 and the correct Air Lift LoadLifter 5000 Air Helper Springs are part #AL57344. That said, they both mount outside of the frame in the same spot so…

view full answer...

Answer 11

Yes, the Timbren Rear Suspension Enhancement System part #TDR1500DQ is a confirmed fit for the rear of your 2019 Ram 1500 Laramie Crew Cab. The Timbrens are very easy to install as there are no tools required and they will do an excellent job of…

view full answer...

Does etrailer Sticker Come on Camco RV Cutlery Tray CAM43508

Product Page this Question was Asked From

Continue Researching