Dimensions of Camco Cutlery Tray Drawer Organizer

Question

Question:

I understand that the cutlery tray extends sideways from 9inch to 13. Can you tell me deep the tray goes? My drawer size is 11.5inch wide x 11inch deep front to back. Im having trouble finding a tray to fit my RV drawer....thanks!

asked by: Bob W

0

Expert Reply:

The Camco # CAM43503 adjusts from 9 to 13 inches wide, and is 11 inches long, so it should just fit in your kitchen cabinet drawers.

expert reply by: Mike L

0

click to enlarge

Answer 1

With trailer tires like your ST235/85R16 in a Load Range G like the #TTWPRG235R16 you have to inflate them to 110 psi when the tires are cold and you'll be set. With trailer tires you need to run the max pressure rating at all times so that you…

view full answer...

Answer 2

There are a couple possible reasons as to why the Lippert Ground Control #LC358590 on your trailer is not responding when you push "auto level". It's possible that the trailer is simply parked on unlevel ground. You may just need to…

view full answer...

Answer 3

To protect the bottoms of your FasTen RV Leveling Blocks Item #CAM44525 and Item #CAM44512 when on gravel I recommend using outrigger pads like Item #337OP18X18R. These are a durable rubber pad so whether you are using them on concrete or asphalt…

view full answer...

Answer 4

It looks like you have the Valterra RV Sewer Hose Storage Hatch w/ Lock #D04-0471VP, which means you'd have a lock like the Replacement Cam Lock with Key #A510 instead of the Valterra Replacement Cam Lock #A520VP. The correct keys would have that…

view full answer...

Answer 5

I wasn't able to find anything that said the manual transmission model cannot be flat towed. With that being said it's not up to me, it's up to Subaru. And I can't recommend you going against what they're telling you. There very…

view full answer...

Answer 6

As long as your transmission is placed in neutral you will be able to flat tow your 2023 Subaru Crosstrek. To flat tow your Crosstrek you'll need the following parts: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-52927-5. Tow Bar:…

view full answer...

Answer 7

I recommend using the Equal-i-zer Weight Dist Shank #EQ90-02-4500 to replace the shank on your E2 hitch. With this shank you will have 14" from the center of the hitch pin hole to the center of the vertical holes for the hitch head. This will…

view full answer...

Answer 8

Good news, I can help you find an A-frame jack that has a lower retracted height than 8 inches. One of the lowest retracted height A frame jacks I was able to find is our part #TJA-2001-B. This jack has a retracted height of 5-1/8 inches. I was also…

view full answer...

Answer 9

We have had customers let us know that using the Equal-i-zer Weight Dist Shank #EQ90-02-4600 has allowed them to tow their trailers with their tailgates down as shown in the included pictures so you should have no issues even when turning. Keep in…

view full answer...

Answer 10

If your existing vent is screwed onto your roof, you will not need to drill holes to install this cover. Simply use the existing screws on each side of your vent and some caulk to attach the 4 mounting brackets included with the Ultra Breeze. Then…

view full answer...

Answer 11

If the bearings of your current hub are both L44649 the Dexter Hub part #8-259-5UC1 that you referenced will fit on your current trailer spindle. Since this has the same bolt pattern as your wheels it would match up with them as well. The star shape…

view full answer...

Dimensions of Camco Cutlery Tray Drawer Organizer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching