bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2013 Ford Focus  

Question:

Do yall carry the base plate for the RM-020, so I can tow my 2013 Ford Focus four wheels down?

0

Expert Reply:

Yes we do. For your 2013 Ford Focus the correct Roadmaster base plate kit you'd want is the part # RM-524430-4 which is a confirmed fit and will work great with the Roadmaster Tracker tow bar part # RM-020 that you referenced. I attached an install video for this kit for you to check out as well.

For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>