How to Add Axle to Boat Trailer to Prevent Trailer Sinking Into Wet Sand
Question:
i have a small boat trailer that i want to pull up on the beach and id like to add another axle to help distribute the weight so it doesnt sink in the sand. it doesnt need to have any suspension - is there something i could bolt to the frame to make the new axle the same distance away as the existing axle is on the leaf spring? i know this is a vague question so any advice would be appreciated. thank you.
asked by: Mike H
Expert Reply:
I understand what you're looking to do and it certainly could be possible to add another axle (and hubs, wheels and tires) that does not have a set of leaf springs suspending it to better distribute the loaded trailer's weight on that sandy beach surface.
To get you started I linked our main axle page which displays both regular beam axles like # CE33201GA-HUB as well as the Timbren axle-less suspension kits like # A12WS545 which bolt right on to the trailer's frame. These kits can be substituted for a beam axle.
If you do this modification with a beam axle I would not plan on taking that non-suspended axle on public roads since a few good bumps (with no suspension to absorb them) could damage the axle, something on the trailer or even worse on your boat.
Another option, if space on the trailer permits, is to stay with your one current axle and change out the wheels/tires to wider ones that will likewise spread the trailer weight over a larger surface area. This might not give you the very same degree of prevention from the tires sinking into the wet sand but it would be a simpler option. If this idea interests you please let me know and I will tell you the kinds of information I will need.
Yet another option is to use a winch like # F142007 to pull the trailer. This will not prevent it sinking into the wet sand but the power of the winch might make this issue unimportant. The linked article on winches may be helpful as you consider this possibility.
Products Referenced in This Question
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Fulton Single Speed Trailer Winch - 7" Long Handle, 12' Strap - Zinc - 900 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- Light Duty
- Standard Hand Crank
- Single Speed Winch
- Polyester Strap
- Fulton
more information >
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 4-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- Redline
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Steel Trailer Wheel - 8" x 7" Rim - 4 on 4 - White
- Shop: Trailer Valet RVR5 Remote-Controlled Trailer Dolly - Wireless Remote - 5,500 lbs
- Video: Review of Malone Watersport Carriers - Scupper Kayak Cart - MAL54GR
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Americana Rubber, Snap-In Valve Stem - 1-1/4" Long - Up to 65 psi
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Steel Trailer Wheel - 8" x 7" Rim - 4 on 4 - Galvanized Finish
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Trailer Hitch
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Shop: Fifth Wheel Hitch
- Article: Trailer Tire Sizing
- Search Results: 25580
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust caps
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Brake Controller
- Video: etrailer Class III Trailer Hitch Installation - 2016 Jeep Cherokee
- Shop: Gooseneck Hitch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
on Trailer Suspension Parts
