Dimensions of Demco 5th Wheel Base Rail Adapter For B&W Turnoverball Hitch

Question

Question:

can you send us a picture of the DM6140 with the measurements in the photo

asked by: Bob G

0

Expert Reply:

I attached a picture of the Demco Rail Kit adapter part # DM6140 that shows all the relevant dimensions for determining if a fifth wheel hitch will fit it.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, since your 2019 Ford F-250 has a B and W Turnoverball gooseneck hitch #BWGNRK1116 the Demco 5th Wheel Base Rail Adapter part #DM6140 would work to provide you with a set of standard fifth wheel rails.

view full answer...

Answer 2

The pucks on the Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package #DM6194 just drop into the openings in your 2019 Chevrolet Silverado's OEM prep package, they are not actually locking in at that point. The Hex…

view full answer...

Answer 3

Looks like you have a Rotoflex pin box and installed a Convert-A-Ball adapter part #CAB-C5G on it which isn't supposed to happen. The king pin plate flexes and causes the issue you have. If you can get me the pin box part numbers you see on…

view full answer...

Answer 4

There might be a solution but it all comes down to what gooseneck hitch you have installed in your truck. If you can let me know what brand hitch you have I can help find you exactly what type of slider hitch solution would work best. Hopefully you…

view full answer...

Answer 5

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

If you already have a B&W Turnoverball Underbed Gooseneck Trailer Hitch then all you need to install standard base rails is an adapter, the Demco 5th Wheel Base Rails Adapter part #DM6140 or the Curt X5 5th Wheel Base Rails Adapter part #16310.…

view full answer...

Answer 8

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 9

I would be happy to compare the B&W Turnoverball System item #BWGNRK1020-5W to the Curt Underbed System item #C60642. Both of these systems are confirmed to fit the 6-3/4' and 8' bed lengths of the 2022 GMC Sierra 2500. The main advantage…

view full answer...

Answer 10

The Demco adapter part #DM6140 that you referenced is a confirmed fit for the B and W Turnoverball gooseneck hitch you have installed in your 2017 Ford F-250. This will allow you to install an industry standard fifth wheel hitch by B&W, Curt,…

view full answer...

Answer 11

Yes, the Head Assembly for B&W Patriot 5th Wheel Trailer Hitches part #BWRVC3200 is the same for both 16,000 lb and 18,000 lb models so you can use this with the Slider Base for B&W Patriot Slider 5th Wheel Trailer Hitch part #BWRVB3270. The…

view full answer...

Answer 12

The Patriot and Companion hitches use different heads so you cannot swap them. So since you are wanting a Patriot slider hitch you'd need the part #BWRVK3270. It should be pretty easy to sell your old Companion hitch second hand as they are very…

view full answer...

Dimensions of Demco 5th Wheel Base Rail Adapter For B&W Turnoverball Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching