bing tracking image
Q & A Icon

Prodigy P3 Brake Controller Installation in 2005 Toyota Land Cruiser  

Question:

I have 2005 Toyota land cruiser. I purchased break controller from eretailer tokoshia brand now I couldnt find the plug around break area. Please can you help me how I can find it. Thank you.

0

Expert Reply:

Your 2005 Toyota Land Cruiser will have a brake controller connection port for the P3 # 90195 under the dash ONLY if it came from the factory with a 7-way trailer connector already installed at the rear bumper. In that case you would use part # 3040-P.

The location of this port in the 2005 Land Cruiser is under the dash, on the far left side above the emergency brake pedal. It may be tucked out of the way or could be taped to other wiring. You will want to look for a square connector that matches the one shown in the linked photo.

If your Land Cruiser did not come from the factory with the 7-way and the under-dash connector you can still install the P3 using our hardwire install kit # ETBC7. This kit requires only that the vehicle have a basic 4-pole harness in place. If you do not have one you can use # 119178KIT.

A help video and article are linked for you.

expert reply by:
0
Adam R
click to enlarge

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>