Pin Locations for the Pollak Fifth Wheel/Gooseneck Harness

Question

Question:

what is the wire orentation on the plug and recepticle of the hopkins 6-24 7-way firth wheel electrical set up specifically the contact for battery recharge from truck to trailer. thanks

asked by: David

0

Expert Reply:

I went out into our warehouse and pulled a Fifth Wheel / Gooseneck Trailer Hitch Wiring Harness # PK11893-11932 to check the wiring placement of the wires. I included a picture of the functions/wires for you.

expert reply by: Jameson C

0

click to enlarge

Answer 1

According to Lippert, the correct bearing kit is the #BK3-200. This includes the #14125A outer and #25580 inner bearing, along with the 10-36 grease seal.

view full answer...

Answer 2

From the images that I can find on your 2021.5 Forest River Sabre 377FLL it appears that it uses the Lippert 1621 pin box. The Reese Goose Box 5th-Wheel-to-Gooseneck Adapter #RP85FR is the correct replacement for the Lippert 1621 pin box. You can…

view full answer...

Answer 3

I looked up the specs of your 2021 Forest River Sabre 37FLL and it has axles that would fall within the capacity range of the SumoSprings part #SS26MV that you are looking at so this would work well.

view full answer...

Answer 4

Your drawing picture with the dimensions of your equalizer did not make it through but since I can identify the equalizer you have as the part #TREQE1 from the picture that did make it through the best cushioned equalizer we offer that will be a…

view full answer...

Answer 5

I would be happy to help you determine if the Road Armor Shock Absorbing Equalizers #LC696740 you were looking at will fit your 2021 Forest River Sabre 36BHQ, but this is not information that we have on hand so you will need to measure your current…

view full answer...

Answer 6

Sure thing and thanks for the pictures! I spoke with Lippert, and they were able to identify your current pin box on your 2019 Forest River Sabre 5th Wheel as a Lippert 1116 pin box. With that being said, I recommend taking a look at the: - Trailair…

view full answer...

Answer 7

The fitment of pin boxes like the Curt Flex Air 5th Wheel Pin Box #LC65VR are solely based on the bolt pattern for the trailer and not the tow vehicle. This specific pin box is a replacement for Lippert's Rhino Box bolt pattern. To determine what…

view full answer...

Answer 8

To best combat chucking, between a MORryde and Rota-Flex pin box, the best option to replace your Lippert 1621 is the Rota-Flex, with the correct part number being the following: - Trailair Rota-Flex 5th Wheel Pin Box #LC328330 While no pin box is…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Pin Locations for the Pollak Fifth Wheel/Gooseneck Harness

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching