Replacement Lock For Trailer Feed Door Latch

Question

Question:

Trailer feed door latch for a 1967 Premier 2 horse trailer.

asked by: Bruce A

0

Expert Reply:

To ensure that the Economy Side Door Lock PLR3057-SS will work with your trailer feed door latch, I have attached a picture showing the various mounting dimensions needed to install this product.

The handle measures 12-1/2", with the mounting bracket that is extended to 13-3/4"
The mounting holes for the 3/4" bar (not included) measure 3-1/4" apart on center
The bracket that holds the handle has mounting holes 4" apart
The hole for the shackle of your lock measures 1/2" in diameter

Let me know if you were needing any additional measurements.

expert reply by: Timothy G

0

click to enlarge

Answer 1

It sounds like you have a 3,500 lb axle and are replacing the bearing seals. The closest seals to that size we offer are the TruRyde Seals for Trailer Bearings, part #RG06-050. These have an inside diameter of 1.719 and outside diameter of 2.565. I…

view full answer...

Answer 2

Yes, the Dexter E-Z Flex Equalizer #K71-655-00 will indeed work with the standard 1-3/4" wide double eye leaf springs.

view full answer...

Answer 3

We do offer a few of the 7-3/4" long equalizers with 3 9/16" holes. Unfortunately, the standard equalizers in this size like the #TREQE1 are not greaseable. There is the Dexter E-Z Flex Equalizer #K71-655-00 which is a 7-3/4" long…

view full answer...

Answer 4

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 5

From the pictures you sent in, it looks like the hinge assembly itself rusted through and ripped off. It seems like it may have been fabricated by the previous owner. That latch style is usually accompanied with a bar like with the Cam-Action…

view full answer...

Answer 6

The 55" Side-Door Bar Lock Assembly part #3057-55 is the longest that I have available for this application. A possible solution for you would be to use the Bracket Assembly for Polar Economy Side Door Lock part #PLR3057-100 which would allow…

view full answer...

Answer 7

I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…

view full answer...

Answer 8

A drum, or hub and drum, is not included along with the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-468-469. These are 3,500 lb electric trailer brakes that fit a 10 inch drum, so if you do need a new hub and drum I have added a link below to…

view full answer...

Answer 9

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…

view full answer...

Answer 10

We would definitely be able to upgrade to a higher capacity Leaf Spring or Silent Ride set up. That being said, we do not carry torsion axles, so we do not have a bolt on upgrade available. The axle #8327820-EB would upgrade you to 5,200 pounds per…

view full answer...

Replacement Lock For Trailer Feed Door Latch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching