Hitch Pin Lock for Reese Bike Rack

Question

Question:

My bike rack is a Reese Explore 2-Bike carrier...model 63134.

asked by: Don

0

Expert Reply:

Locking hitch pins are normally manufacturer-specific, so can you let me know which bike rack you have? That way I'd be able to get you the correct one.

expert reply by: Kyle S

0

Don

7/9/2018

My bike rack is a Reese Explore 2-Bike carrier...model 63134.

Reply

Kyle S.

7/9/2018

The Reese Explore 63134, which is also known as the Reese Q-Slot, does have a hitch pin lock available. We have found that the Hitch Tite Anti-Rattle Hitch Lock # SA3022 will work with this carrier as it has the same threads as the hitch pin that comes with the rack.

Reply

Answer 1

I recommend Class III 2" Curt Trailer Hitch Receiver part #C13420 for your 2020 Kia Telluride. The Curt trailer hitch is a great option because it is a concealed cross tube design. The only portion of the hitch that will be visible once…

view full answer...

Answer 2

While manufacturers tend to keep this information private, since most threaded bolts/hitch pins for bike racks are considered "proprietary", we've determined that the Hitch Tite Anti-Rattle Hitch Lock for Saris Bike Racks…

view full answer...

Answer 3

From what I can find the Reese Outfitter Adventure System Bike Rack can take a standard hitch pin lock so you can use the etrailer Hitch Pin Lock #e98879 if you have a 1-1/4" receiver or the etrailer Hitch Pin Lock #e98880 if you have a…

view full answer...

Answer 4

There is not a replacement hitch pin for the old Reese Outfitter bike rack, and the hitch pin you mentioned won't work with the rack, so if you are missing yours, or the hitch pin is damaged to the point that you can't use it with…

view full answer...

Answer 5

The European version of the Thule EasyFold XT Bike Rack is designed to mount to a 50mm hitch ball like the Brophy #EH53C-C. I have attached a link that will also take you to our selection of 50mm hitch balls that you can look through.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Hitch Pin Lock for Reese Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching