Availability of Trailer Wheel Lock that Can be Keyed Alike

Question

Question:

I am a manager for Lowes home improvement and I would like to purchase several wheel locks from you but I would like them keyed alike. If this can be done I might have 10 more stores willing to buy them too. Each store would need at least 10 to 20. Please let me know if this can be done

asked by: Rodney M

0

Expert Reply:

We do have wheel locks that can be ordered "keyed alike". For that we have the Blaylock Trailer Wheel Lock part # BLEZ-300 which is for smaller 13 to 15 inch wheels and we have the part # BLEZ-302 which is a fit for 15 to 20 inch wheels.

You can get these keyed alike between the two part numbers as well. I attached a review video for you to check too.

expert reply by: Jameson C

0

click to enlarge

Answer 1

That is correct. If you check out the attached picture of the Master Lock Stainless Steel Padlock #ML40D (3/8" shackle) installed on the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 you can see that there is no extra space for a larger size…

view full answer...

Answer 2

I reached out to my contact at Blaylock and they said the EZ Trailer Wheel Lock - Aluminum - 13" to Small 15" Wheels, #BLEZ-300 should work for your tires, but they cannot confirm in all cases. They recommend the Blaylock EZ Trailer Wheel…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…

view full answer...

Answer 8

I checked out the installation instructions for this Draw-Tite Front Mount Trailer Hitch #65028 and it will bolt to the bottom of the frame rail. The hitch opening will come out below the bumper and not through the opening behind your license plate.…

view full answer...

Answer 9

You're welcome! The lightest weight wheel tire combo with a ST235/75R15 tire is the Taskmaster ST235/75R15 Radial Off-Road Tire w/ 15" Vesper Silver Mod Wheel item #TA75RR which weighs in at 55 lbs.

view full answer...

Answer 10

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

view full answer...

Availability of Trailer Wheel Lock that Can be Keyed Alike

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching