Replacement Shank and Head for Equal-i-zer Weight Distribution System
Question:
I purchased an Eaqual-I-zer hitch with the 4 point sway control and I love the product. I have towed with and without it and its a night and day difference. The problem I ran into is that someone stole the hitch off the back of my truck and I want to purchase another weight distribution hitch but I dont want to pay for the full set up when I still have everything but the hitch. I was wondering if there was anyway I could just re-purchase the hitch alone by itself instead of having to pay for everything again, if so that would be greatly appreciated. Thank you.
asked by: Michael P
Expert Reply:
It sounds like you are just needing to replace the adjustable shank for your Equal-i-zer Weight Distribution System. If this is the case, then all you need is the Equal-i-zer Weight Dist Shank # EQ90-02-4100. This will work perfectly with your existing system and features up to a 7 inch rise or a 3 inch drop.
I have attached a short video demonstration on this part that you can also check out.
We do also have replacement heads for the Equal-i-zer Weight Distribution Systems if that is what you are needing. If you can tell me what model system you have, I will be happy to recommend the correct part. If you happen to have the Equal-i-zer System # EQ37060ET that you were looking at, the correct replacement head is part # EQ90-02-0600.
I have also attached a link that will take you directly to our available selection of Equal-i-zer replacement parts that you can look through if needed.
Products Referenced in This Question
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Replacement Head for Equal-i-zer Weight Distribution Systems - 600 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Determining The Correct Replacement Equalizers For A Tandem Axle Trailer With 5,200lb Axles
- Q&A: Recommended 2-1/2 Inch Equalizer Weight Distribution Shank with More Drop
- Q&A: Correct Weight Distribution Hitch For My 2002 Dutchman bunkhouse 26 BH26
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Overview of Lubricating Grease
- Q&A: How to Pick Out a Weight Distribution System for a 33BHTS Jayco
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Q&A: Can Curt Weight Distribution Shank be Used with Reese Weight Distribution System
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Availability Of Drop Shank For Fastway e2 1000lb Weight Distribution Hitch
- Q&A: Weight Distribution Extended Length Shank To Allow Tailgate to Open Without Hitting Tongue Jack