Availability of Wiring that Could be Used for Replacing Back Half of Trailer Wiring
Question:
I have a 18foot 2 axle with brakes equip. trailer that was damaged in a fire. Wiring from first axle back melted. Do you have a wiring kit?
asked by: Ron S
0
Expert Reply:
We have 4-way wiring by the foot as part # 16-4B-1 which you could use to provide new wiring to the back of the trailer but we don't have kits specifically designed for half of a trailer. This would be for the lighting functions of the trailer. Then for 10 gauge wire for the brakes we have part # 10-1-1. Both of these are sold by the foot.
expert reply by:
Jameson C
0
Products Referenced in This Question
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Q&A: Caliper Bolts for AL-KO/Hayes Disc Brake Caliper BP18-050
- Q&A: Replacement Oil Seal for AL-KO 568303
- Q&A: Does The Progressive Dynamics PD4655V Have A Lithium Jumper
- Q&A: Which Instructions Are Used Installing a Roadmaster Brake-Lite Relay in a Ford F-150 w/ Neutral Tow
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Trailer Tire Sizing
- Article: Flat Towing Package for 2014-2015 Chevrolet Equinox