Availability of Grease Seal with 2-1/4 Inch Outer Diameter
Question:
I use the same bearing as gentleman above but I measure the grease seal closer to 2 and 1/4 and this OD shows over two and a half Im nowhere near that on my axle
asked by: Jeremy G
Expert Reply:
If your hub uses the # L44649 outer bearing and the # L68149 inner bearing, then the Grease Seal # RG06-050 that you mentioned is indeed the most common seal used for this type of spindle, but it's possible your particular hubs use a different size.
The closest grease seal we have available to the 2-1/4 inch outer diameter you mentioned is with the Grease Seal # 10-42. This seal has an outer diameter of 2.33 inches and an inner diameter of 1.75 inches. You can compare these dimensions to your existing seal to see if this matches.
Otherwise, I recommend verifying your measurements using a digital caliper like # PTW80157 since they need to be so exact. The above mentioned bearings and seal are not available in a single kit, but they can simply be obtained as separate items. I have also attached a link that will take you to our available selection of grease seals that you can look through.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.750 Inch I.D.
- 2.33 Inch O.D.
- Redline
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Demco Hydraulic Brake Kit - Free Backing - Galvanized - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Hydraulic Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,750 lbs
- Shop: Grease Seal
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Shop: Dexter Hydraulic Brake Kit - Free Backing - 10" - Left and Right Hand Assemblies - 3,750 lbs
- Search Results: trailer brakes
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: brake line
- Video: Demco Trailer Brakes - Hydraulic Drum Brakes - 40716-15 Review
- Shop: Trailer Wiring
- Article: How to Bleed Your Trailer Surge Brakes
- Shop: Brake Controller
- Search Results: brake actuator
- Video: etrailer Hydraulic Trailer Brake Kit Installation
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Gooseneck Hitch
- Search Results: brakes
- Video: etrailer Hub And Drum Assembly Installation
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM72VR
- Shop: Suspension Enhancement
- Search Results: surge brake actuator
- Video: Review of Demco Trailer Brakes - Hydraulic Drum Brakes - 18788-87
- Shop: Fifth Wheel Hitch
- Search Results: brake shoes
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35 Review
- Search Results: brake line kit
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35-D Review