Replacement Bathroom Fan Vent for 2017 Keystone Laredo

Question

Question:

I have a 2017 Keystone Laredo bumper pull and I need a new bathroom fan.

asked by: CS

1

Helpful Expert Reply:

For a bathroom fan for your 2017 Keystone Laredo we have the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan # MA00-03851 that fits the standard 14 inch by 14 inch roof openings that RVs have for bathroom vents. This has a quiet one-speed fan and an LED light.

expert reply by: Jameson C

1

Answer 1

It will indeed work; I just checked with Lippert for you and was able to verify the correct toggle switch for your Lippert Power Stance Electric Trailer Jack #LC69VR (which is the 813748), is the following: - Replacement Extend/Retract Switch for…

view full answer...

Answer 2

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 3

The MaxxAir Mini Deluxe Trailer Roof Vent part #MA00-03851 once installed will sit almost flush with the ceiling. The panel which houses the light and control knob I would say is around 1/4" - 1/2" thick so that is all that would sit inside…

view full answer...

Answer 4

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires experience…

view full answer...

Answer 5

The black top of the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan #MA00-03851 is just under 4 inches tall so with the white base and black top combined, it will sit about 4-1/8 inches above the roof. I've attached a video to help with some of…

view full answer...

Answer 6

Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…

view full answer...

Answer 7

GM does not supply the attaching nuts required to secure the wires to the studs. These can be obtained locally. You will need (1) M6 x 1.0 nut, #185916 and (1) M8 x 1.25 nut, #185917. I have attached an FAQ for you that may also help.

view full answer...

Replacement Bathroom Fan Vent for 2017 Keystone Laredo

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching