Cover for Quick Disonnect Fittings on Roadmaster BrakeMaster

Question

Question:

I need to purchase 2 rubber boots that cover the Air quick connect fittings on the coach and car

asked by: Steve K

0

Expert Reply:

If you have the Roadmaster BrakeMaster and need to cover the quick disconnect the part you need is # RM450760-50, which is sold in a quantity of one so you'd need to order a pair to cover two fittings.

expert reply by: Kyle S

0

Answer 1

You can get both sides of the quick disconnect for the Brakemaster braking system using part #RM-921004-80. Or for the female end with the L-shaped mounting bracket use #RM-921004-60. Or for just the female fitting use #RM-450710.

view full answer...

Answer 2

I spoke with my contact at Roadmaster and sent him the picture you submitted and he said you would need the part #RM-450601-50 and the part #RM-450045

view full answer...

Answer 3

We have several replacement parts that are compatible with the Roadmaster Brakemaster Systems, like #RM-9160. If you look in the parts break down in the included instructions link, you can see the parts in the Brakemaster system. The RM-9160 did not…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 10

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

You have a good eye Richard, as there is not a difference between the etrailer and Demco base plates that fit your 2024 Ford Maverick: - etrailer Invisible Base Plate Kit e64FV - Demco Tabless Base Plate Kit #DM77YV Both will fit your '24…

view full answer...

Cover for Quick Disonnect Fittings on Roadmaster BrakeMaster

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching