Info Needed to Pick Out Hub for 1981 Alumalite Travel Trailer
Question:
I have a 1981 Alumalite Travel trailer with tandem Dayton Fayette stamped on the brake drum. They are the 4 bolt with reverse thread Stamped on the drum is Max Dia 8.040 IN **9260** 01-09260 WF1 I am looking to replace the brakes and drum for a modern wheel. What are my next steps please and thank you.
asked by: Jim H
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Once we have the correct fitting hubs we'll be able to then pick out the correct brake assemblies.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Does The Amount Of Leaves On A Trailer Leaf Spring Matter?
- Shop: Timken Bearing Kit, LM67048 Inner/Outer Bearings, LM67010 Inner/Outer Race, 203013 Seal
- Q&A: How to Pick Out Replacement Hubs for a Trailer
- Q&A: How to Pick Out Replacement Bearings for 2007 Suntracker
- Search Results: lm67010
- Search Results: lm67048
- Search Results: 10~36 seal
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: Trailer Hitch
- Search Results: leaf spring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Search Results: equalizer
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Best Cushioned Equalizer Replacement for Equalizer that is 6 inches Wide
- Article: Trailer Tire Sizing
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Search Results: leaf springs
- Shop: Suspension Enhancement
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Brake Controller