How to Pick Out Replacement Hubs for a Trailer
Question:
Hello i have a trailer that i recently was given. I want to by hubs with the bearings, how would i go about finding out which setup i need?
asked by: David
Helpful Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Q&A: Does The Amount Of Leaves On A Trailer Leaf Spring Matter?
- Shop: Timken Bearing Kit, LM67048 Inner/Outer Bearings, LM67010 Inner/Outer Race, 203013 Seal
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Info Needed to Pick Out Hub for 1981 Alumalite Travel Trailer
- Q&A: How to Pick Out Replacement Bearings for 2007 Suntracker
- Search Results: 10~36 seal
- Search Results: lm67048
- Search Results: lm67010
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Replacement Shackle Strap - 2-5/8" Long
- Shop: Replacement Shackle Strap - 2-5/8" Long - Galvanized
- Shop: Replacement Shackle Strap - 3-1/8" Long
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: leaf spring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: equalizer
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: etrailer Electric Trailer Brake Kit Installation
- Q&A: Best Cushioned Equalizer Replacement for Equalizer that is 6 inches Wide
- Shop: Suspension Enhancement
- Search Results: 25580
- Search Results: trailer brakes
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Q&A: Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall