Parts Needed to Flat Tow a 2002 GMC Yukon XL

Question

Question:

Can I flat tow it? What blue ox kit do I need? Do you have a video for the installation?

asked by: RJ B

0

Expert Reply:

Yes, you can flat tow your 2002 GMC Yukon XL. There are a number of parts you need in order to do this, and they are all available separately instead of in a single kit.

Starting with compatible base plates, for your 2002 GMC Yukon XL you need Blue Ox Base Plates # BX1682. For a tow bar I recommend going with the Blue Ox Alpha # BX7380 because of how easy the tow bar is to connect to the base plates as well as its long arms, which make it easier to maneuver when towing; it also comes with safety chains already attached.

For wiring kit that will allow your Yukon's lights to function while being towed you can use the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. A supplemental braking system is a requirement in most states and I highly recommend the SMI Stay-IN-Play # SM99251 for this. This is a proportional braking system which is a one-time install which you can leave in so you'll never have to deactivate or re-activate it.

Finally, it is likely you will need a high-low adapter such as # RM-076 to keep your tow bar level with your tow vehicle. The adapter you need is going to depend on some measurements you'll need to take. I have added a link to a help article on high-low adapters which explains the measurements you'll need, as well as a link to our page with our selection of adapters.

expert reply by: Kyle S

0

Answer 1

We do have a potential solution for you, but I will tell you up front that we do not offer a direct replacement for your Direct Vent Water Heater Model SW6D. What we recommend as a replacement is the Furrion RV Tankless Water Heater #FR98SR. This…

view full answer...

Answer 2

Yes, I looked up the weight of your 2000 Chevy Silverado 1500 and since the max weight it can be configured as is 4,784 lbs the 5k Blue Ox tow bar part #BX7322 would work. The correct Blue Ox base plate kit to use with this would then be the part…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

No, the Blue Ox Base Plate Kit #BX1674 is not the correct base plate kit for your 2007 Chevrolet Silverado Classic and will not fit. The correct Blue Ox base plate kit for your truck is the Blue Ox Base Plate Kit #BX1682 which fits the 1500 LD or the…

view full answer...

Answer 5

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 6

The Roadmaster Tail Light Wiring Kit for Towed Vehicles #RM-152-LED requires a 1" hole to install the bulbs into the tail light housing. It does look like you're limited on spacing inside your housing and when I reached out to my contact at…

view full answer...

Answer 7

You are correct in that the #RM-88400 brake light relay will not work with the JL wranglers. This circuit you would need to connect one is not accessible. You are also correct that the brake light switch will shut off after 10 minutes of inactivity.…

view full answer...

Answer 8

The etrailer Invisible Base Plate Kit #e86YR is compatible with Blue Ox tow bars without the need of an adapter so you would be good to go with your Blue Ox Ascent Non-Binding Tow Bar #BX4370. It sounds like you have almost everything you'll need…

view full answer...

Parts Needed to Flat Tow a 2002 GMC Yukon XL

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching